mz-24 Software-Update

Alles kan hier besproken worden, discussies, mededelingen etc. etc.
Plaats reactie
CorB

mz-24 Software-Update

Bericht door CorB »

Nachdem die mz-24 Pro so gut ankommt und auch immer mehr Fragen aufkommen, ob und wann es die Software auch für die mz-24 geben wird, können wir Euch heute sagen, dass es soweit ist.

Ab sofort bieten wir Euch die Möglichkeit, das neue Pro-Betriebssystem auf Euren Sender zu spielen. Eine neue Menü-Struktur, sowie tolle neue Features warten auf Euch:

- Zusätzliche Modelltypen für Boot, Auto und Kopter

- Benutzerdefinierte Sprachansagen, die in den Sender eingespielt und zugewiesen werden können

- Snap-Roll-Funktion

- Auto-Trimm-Funktion

- Neues Menü für Kanalsequenzer

- Und noch viel mehr…

Alle weiteren Funktionen findet Ihr unter www.graupner.de/mz-24-pro

Macht Euren Sender auf Software-Ebene zu einer Pro und das alles für einmalig 50,00 € (ggf. zuzüglich Versand). Die Folgeupdates sind dann natürlich wie gewohnt kostenlos und können von Euch selbst durchgeführt werden.

Ihr möchtet vorbei kommen und das Update durchführen lassen? Kein Problem, kommt zu den bekannten Geschäftszeiten vorbei (nachzulesen unter: https://www.graupner.de/Graupner-Service). Der Sender wird dann entgegengenommen. Je nach Aufkommen der Anfragen dauert der Durchlauf dann drei bis fünf Werktage. Sobald die Anlage fertig ist, werdet Ihr informiert.

Der Weg ist zu weit? Dann füllt unser Service Formular mit dem Hinweis auf das Update aus, legt alles zusammen in einen Karton und schickt es zu uns. Auch hier gilt, je nach Aufkommen der Anfragen wird das Update in drei bis fünf Werktagen erledigt sein (Postweg nicht eingerechnet). Wenn möglich markiert den Karton mit dem Satz Update auf mz-24 Pro.

Bevor Ihr den Sender zu uns bringt, oder einschickt, exportiert ihr bitte den Modellspeicher auf Eure SD-Karte. Wichtig: Es wird keinerlei Hardware ausgetauscht und keine Prüfung der Anlage vorgenommen. Sollte dies gewünscht sein, durchläuft die Anlage den normalen und länger andauernden Service-Weg.
------
Make your mz-24 a Christmas present.

After the successful launch of the mz-24 Pro we are increasingly asked for a software update for the regular mz-24. Today we would like to announce that it is now possible to get the new software.

A new menu structure as well as great new features are waiting for you:

- Additional model types for boat, car and copter

- User-defined voice announcements, which can be imported and assigned in the transmitter

- Snap-Roll function

- Auto-Trim function

- New menu for channel sequencers

- And many more…

The description for all other functions can be read at https://www.graupner.com/mz-24-Pro-gb

Upgrade your radio, get the Pro software package for only 50 € (possibly additional shipping costs).The following updates will be free of charge and you will be able to proceed them by yourself.

You want to visit us and get the update done? Alright, visit us during our business hours (be viewed at: https://www.graupner.com/Graupner-Service). Depending on the amount of queries, the update will be done in approximately three to five working days. As soon as the update is complete, you will be informed by us.

The way to us is too far? Fair enough, fill in our service form with the reference "update", put everything together in a box and send it to us. The same applies here: Depending on the amount of queries, the update will be completed in approximately three to five working days (postage time not included). If possible write “update mz-24 pro” on the carton.

Before you bring or send the transmitter to us please export the model memory to your SD card. Please note: We will not change any hardware components and will not check the radio. If desired, the radio runs through the normal and longer-lasting service path.

Afbeelding
Plaats reactie